HVAC Replacement Cost in Lincoln, NE – Get an Instant Estimate
Wondering about HVAC replacement cost in Lincoln, NE? National Furnace & Air Conditioning makes it easy to find out what a new furnace, air conditioner, or heat pump could cost with our instant online estimate calculator.
Simply select your replacement system, enter your home's square footage that the HVAC system serves (excluding the basement), and compare Good, Better, and Best equipment options with estimated installed prices and financing options.
Locally owned and serving Lincoln, Nebraska, since 1992.
National Furnace · Lincoln, Nebraska
Instant HVAC Replacement Estimate
Answer a few simple questions to see replacement options for your home.
Name, phone and email are required to reveal prices. No purchase commitment.
Your estimate is one step away
View Your Estimate
Share your details to reveal prices and send a general inquiry. No equipment option is selected yet.
Your estimate is preliminary. We'll verify equipment sizing, installation needs and final pricing with you.
Preliminary installed estimates, subject to onsite sizing and installation review. Controls and site-specific work may cost extra.
Estimate details, sizing & savings assumptions
How these example options are selected
- Square-foot sizing is a preliminary guide, not a Manual J load calculation. The current site's cooling thresholds are retained: 900–1,200 sq ft → 2 tons; 1,201–1,500 → 2.5; 1,501–1,800 → 3; 1,801–2,200 → 3.5; 2,201–2,600 → 4; 2,601–3,300 → 5.
- We first filter the saved catalog by brand, replacement scope, applicable efficiency and verified upflow furnace support. Downflow-only and unverified-orientation furnaces are excluded before capacity or tier matching. Cooling-system packages are filtered by cooling size; furnace-only options are filtered by furnace input capacity and do not imply a cooling match. Each Good, Better and Best equipment line is checked independently. If that line has no exact half-ton source package, we can show its next whole-ton package and label the difference. We do not skip an available size or use a larger cooling package to bypass an exact-size match that fails safety or furnace checks. Furnace packages are normally narrowed to the closest input capacity to the current site's preliminary guide, within 25%. When that limit would block a complete AC/furnace or heat-pump/furnace match, we use the next higher furnace input available in the same verified brand, system type, furnace-efficiency and cooling-size group. We label that upward sizing assumption; we never mix components to make a new package. If no higher match exists, no instant price is shown. Furnace-only matching retains the 25% limit. Actual capacities still require an onsite load and fit review.
- Cooling tiers use the requested nominal equipment lines, not arbitrary actual-rating cutoffs: Good follows the 13-class air conditioner or 14-class heat pump; Better follows Rheem’s 16-class or Trane’s 17-class line; Best follows Rheem’s 19-class or Trane’s 20-class line. Cards show the exact matched SEER2, which can differ from the line name. We preserve the cooling size selected by the existing brand/scope rule, then match furnace capacity within each requested line using the same input-capacity guard and approved next-higher complete-package fallback. We select the lowest installed total from eligible exact packages within that tier. No components are mixed and no different line is substituted when a tier is unavailable. Furnace-only tiers use source-verified entry, two-stage and premium variable-speed/modulating feature levels within the chosen AFUE class; no SEER is assigned and a missing distinct tier remains unavailable.
- Complete-system packages use full-system AHRI source records. A furnace-only option is not a complete AHRI-certified cooling system. Outdoor-unit + coil options use actual saved two-piece matching groups, not a furnace price subtracted from a full system. Their ratings require the specified existing blower and matching conditions; we do not claim certification of your retained furnace. Ratings depend on the listed matching configuration and required controls/accessories. Cabinet fit, venting, electrical capacity and heating load are not determined by square footage.
- Prices are from the saved November 10, 2026 LIVE pricebook export, not a live inventory or production-price lookup. They include no customer sales tax. Installed equipment and the source service fee are summed once. Electrical is already included in that total and is not added again. Final equipment, installation scope and pricing require confirmation by National Furnace.
- Energy-use comparisons use separately entered cooling and furnace ages, or a known efficiency override. Age-based baselines are approximate era minima for ordinary ducted split cooling and indoor gas furnaces in Nebraska, not measured performance or an average of older equipment. Manufacture dates and older inventory can differ from installation-year assumptions. Legacy SEER is modeled on an approximate SEER2 basis using 0.95. Cooling electricity and gas furnace fuel percentages are separate and must not be added. Dual-fuel options instead show a separate generic heating-energy cost percentage sensitivity at a 20°F cutoff, subject to the detailed scenario assumptions below; no annual heating dollars or therms are inferred from house size.
Financing terms and other Trane options
Non-binding financing estimates. Your actual payment, fees and financing terms are determined by Wells Fargo for Trane or Synchrony for Rheem. All offers are subject to credit approval, lender terms, participating dealer eligibility and plan availability. The full installed price is used as the estimated financed amount, with no down payment. Estimates use published payment factors, not a final lender quote. Interest applies to the APR plans.
Trane / Wells Fargo: For amounts of $7,500 or more, the estimate shows plan 3690 at 9.99% APR with 96 monthly payments, using a 1.52% monthly payment factor. Below $7,500, it shows plan 0990 at 9.90% APR for up to 70 months, using a 1.90% factor. Plan 0990 is also an alternative for larger purchases. The $7,500 minimum applies to the actual financed amount, so a down payment can change eligibility.
Another Trane option, plan 0012: No interest if paid in full within 12 months. This is deferred interest, not a 0% APR installment plan. Interest is charged from the purchase date if the qualifying balance is not paid in full within 12 months. Regular monthly payments are 3.5% of the amount financed, with a $40 minimum, and will not pay the purchase off within the promotional period. Additional payments are needed to pay it off in time.
Rheem / Synchrony plan 965: 11.99% APR until paid in full, using a 1.75% monthly payment factor. The lender sheet estimates approximately 86 payments; this is not a guaranteed term. A one-time $29 activation fee applies to the initial purchase, not later purchases. It is disclosed separately and is not included in the displayed monthly estimate; final handling of the fee must be confirmed with the lender.
Rates are from the supplied Trane sheet effective September 1, 2026 and Synchrony sheet revised August 29, 2025. Offers may change. Current account terms, participating dealer eligibility, plan availability and lender disclosures apply. This form sends estimate inquiries to National Furnace. It does not submit a credit application or commit you to a purchase or financing.
HVAC Replacement Costs & Services in Lincoln, NE
National Furnace & Air Conditioning has proudly served Lincoln, Nebraska, since 1992. Whether you're comparing HVAC replacement costs or need repairs to your existing system, we're here to help.
Our HVAC Services:
Contact National Furnace & Air Conditioning for professional HVAC service and free replacement estimates in Lincoln, NE.
Want to learn more about energy-efficient heating and cooling systems? Visit ENERGY STAR for information on equipment efficiency and potential energy savings.
